Count jitter and delay->Help

[Alaios]

Thx... but still can't find the jitter..
Let me explain what i have dome up to now...
I have enabled these two option in the /etc/argus.conf

ARGUS_GENERATE_RESPONSE_TIME_DATA=yes
ARGUS_GENERATE_JITTER_DATA=yes

except from that when i execute the command i use the
parameter -J just for being sure.

argus  -M 1 -S 1 -J -w myfile
After that i use the ra or raxml executing

ra -a  -r myfile
raxml -a  -r myfile
but still nowhere the jitter is...


for example lets see some output from the raxml. Can u
see below the jitter? Why i can't do it correct?
:(
Thx Alex

<ArgusFlowRecord  ArgusSourceId = "10.1.0.2"
SequenceNumber = "210" Cause = "Shutdown"
     StartDate = "2004-12-17" StartTime = "14:03:25"
StartTimeusecs = "563190"
     LastDate  = "2004-12-17"  LastTime = "14:03:25" 
LastTimeusecs = "774486"
     Duration = "0.211296" TransRefNum =  "9">
    <Flow> <IP SrcIPAddr = "10.1.0.1" DstIPAddr =
"10.2.0.2" Proto = "udp" Sport = "32797" Dport =
"5015" /> </Flow>
    <FlowAttrs SrcTTL = "63" DstTTL = "0" SrcTOS =
"b8" DstTOS = "0" />
    <Metrics SrcCount = "25" DstCount = "0" SrcBytes =
"26050" DstBytes = "0"  SrcAppBytes = "25000"
DstAppBytes = "0" />
       <ArgusTimeStats>
          <SrcActive n = "25" MeanUsec = "9083" StdDev
= "8798" MaxUsec = "29020" MinUsec = "85" />
       </ArgusTimeStats>
  </ArgusFlowRecord>













--- Carter Bullard <carter at qosient.com> wrote:

> When argus is configured to report jitter data
> (variable set
> in the argus.conf file), each record will contain
> jitter
> metrics for the specific flow.  The values in the
> record
> can be printed using raxml().  Once you've gotten
> that far, if you still have questions, please send
> mail
> to the list !!!
> 
> Carter
> 
> 
> > From: Alaios <alaios at yahoo.com>
> > Date: Thu, 16 Dec 2004 11:34:28 -0800 (PST)
> > To: <argus-info at lists.andrew.cmu.edu>,
> <alaios at yahoo.com>
> > Subject: [ARGUS] Count jitter and delay->Help
> > 
> > Hi... in the main page of the argus web site i
> have
> > found that
> > 
> > "such as connectivity, capacity, demand,
> > loss, delay, and jitter on a per transaction
> basis."
> > 
> > My problem is that i need to count the jitter of a
> > flow but still i am not able to do it. The
> previous
> > days i have read all the docs but the only
> appropriate
> > value tha i have found is the -J for the argus
> > program...
> > 
> > Still i can't find how to show the jitter and
> > interarrival between my packets..
> > CAn u plz suggest me somthing?
> > Thx
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > 
> 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Helps protect you from nasty viruses. 
http://promotions.yahoo.com/new_mail