[R129 SL] FW: schematic request ~ UPDATE~ working

[mooncusser]

Many thanks...
On Mon, 30 Apr 2007 20:48:31 +0200, you wrote:


>It is electronic with sensor on the gearbox ,only sensor-cables or

>speedometer is defect.

>Transm. inductive speed sensor

>Beneath vehicle, left side of transmission, hidden.

>

>

>

>Jan Kuylaars Westerhoven

>

>-----Oorspronkelijk bericht-----

>Van: r129list-bounces at mbcoupes.com

>[mailto:r129list-bounces at mbcoupes.com]Namens mooncusser

>Verzonden: maandag 30 april 2007 2:23

>Aan: SL Mailing List

>Onderwerp: Re: [R129 SL] FW: schematic request ~ UPDATE~ working

>

>Hi all,

>Well I found a used relay control on ebay for a 2004...changed out the

>bracket with my old one and bingo...bango...

>everything the way it used to be before winter. Total cost 247.00 and my

>time of course...

>

>Now I am looking for info on speedometer not functioning...pulled out onto

>the highway... the needle bounced a couple of times

>and stopped working. Any ideas...??? Does it use a speedometer cable or is

>it electronic??? Any help appreciated...

>

>

>On Sun, 15 Apr 2007 08:36:51 -0400, you wrote:

>

>>Good morning all,

>>       I removed the relay control and inspected the circuit boards

>>inside. No cleaning will ever get these back in working order. Looks like

>they

>>spent some serious time rusting. Best solution is to replace the board.

>>Thanks for all your help...

>>On Sun, 15 Apr 2007 00:11:21 +0200, you wrote:

>>

>>>Maybe you can fixed it. There is nothing special electronics inside. Only

>>>connectors, printed circuit wires and relay's. So I should try to take out

>>>the complete control board. Take a brush with cupper hairs and clean whole

>>>the printed circuit board. Where the cupper wire parts then are

>disappeared

>>>, you can easily clean the existed  part and well a normal wire over the

>>>missing part from the printed layer. The contact from the relay you can

>>>clean with fine sandpaper. The relay's and connectors are also welded in

>the

>>>printed circuit. You can well them again with fresh solder tin.  I believe

>>>it is to repair.

>>>

>>>Jan Kuylaars Westerhoven

>>

>>The MB Coupes Website!

>>R129 SL Mailing List

>

>B F Rollins II

>

>1)1963 220 (now history)

>  Blue/Grey

>2)1981 240d (body cancer claimed this one )

>  Ivory/Brown 192000

>3)1992 300sl 68000 (summer)

>  Black/Gray

>4)1992 190e 159000

>  Black/Gray (winter)

>The MB Coupes Website!

>R129 SL Mailing List

>

>The MB Coupes Website!

>R129 SL Mailing List