[R129 SL] RE: R129LIST Digest, Vol 9, Issue 13

[Jan Kuylaars]

In addition on mine last mail:

If the window is crashed at the upper part, and is stocked between the
rubber, and/or the guide u profile inside the door, there is also a
possibility that the current from the motor come to high and the fuse
will blow.
That is properly the reason if the window- switch will not operate.
But first you had to correct the alignment from the window and then
replace the fuse.
First pick-up the stopper at the bottom off the door compartment. 
Let someone else operate the window switch , and help with your body
power to lower the window to the bottom.
Then you can mount the stopper at its original place, and should the
problem be gone.

REMEMBER THAT SOMETIMES THE FUSE ARE BLOWN WITHOUT THAT YOU CAN SEE THAT
THE LEAD IS BURNED AWAY.
So replace the fuse to be sure.

The window has only an fuse ; an switch, an (roof command) relay, and a
motor. The rest is wiring, so there can not be a  very difficult
problem. The relay and switch are connected parallel.

Success.

Jan Kuylaars

-----Original Message-----
From: r129list-bounces at mbcoupes.com
[mailto:r129list-bounces at mbcoupes.com] On Behalf Of
r129list-request at mbcoupes.com
Sent: Wednesday, July 27, 2005 6:01 PM
To: r129list at mbcoupes.com
Subject: R129LIST Digest, Vol 9, Issue 13


Send R129LIST mailing list submissions to
	r129list at mbcoupes.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.pairlist.net/mailman/listinfo/r129list
or, via email, send a message with subject or body 'help' to
	r129list-request at mbcoupes.com

You can reach the person managing the list at
	r129list-owner at mbcoupes.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of R129LIST digest..."


Today's Topics:

   1. RE: R129LIST Digest, Vol 9, Issue 12 (Jan Kuylaars)


----------------------------------------------------------------------

Message: 1
Date: Wed, 27 Jul 2005 12:39:26 +0200
From: "Jan Kuylaars" <jan at rian-bv.nl>
Subject: [R129 SL] RE: R129LIST Digest, Vol 9, Issue 12
To: <r129list at mbcoupes.com>
Message-ID: <018e01c59297$763810f0$1601a8c0 at techniek>
Content-Type: text/plain;	charset="US-ASCII"

In the door there are two stoppers screwed to the inside plate to fix
the end of the window height. You can reach it after remove the cover.
If the nut of on  stopper is come loose, and the stopper fall down in
the door compartment, the window  
Will be turned a little bit at the end and come higher then normally. I
believe the window is now clamped between the rubbers and the door, and
will not be able to go down. If the window will not move , the bottom
switch will not operate and the roof will not work.


Jan Kuylaars , in the naburhood from the first twister in my lifetime in
Holland. Only damage some tree's and one house.

-----Original Message-----
From: r129list-bounces at mbcoupes.com
[mailto:r129list-bounces at mbcoupes.com] On Behalf Of
r129list-request at mbcoupes.com
Sent: Tuesday, July 26, 2005 6:01 PM
To: r129list at mbcoupes.com
Subject: R129LIST Digest, Vol 9, Issue 12


Send R129LIST mailing list submissions to
	r129list at mbcoupes.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.pairlist.net/mailman/listinfo/r129list
or, via email, send a message with subject or body 'help' to
	r129list-request at mbcoupes.com

You can reach the person managing the list at
	r129list-owner at mbcoupes.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of R129LIST digest..."


Today's Topics:

   1. WINDOW (william hughes)
   2. Re: WINDOW (George Simpson)


----------------------------------------------------------------------

Message: 1
Date: Tue, 26 Jul 2005 08:24:20 -0400
From: william hughes <jennianenterprises at verizon.net>
Subject: [R129 SL] WINDOW
To: SL Mailing List <r129list at mbcoupes.com>
Message-ID: <42E62B74.5090003 at verizon.net>
Content-Type: text/plain; charset=us-ascii; format=flowed

this morning i put up both side windows - tried to close driver's side
door and window is stuck in the fully up position - hits the top and
trouble 
closing door.
and the switch does nothing can't move it up or down - please help
regards, bill


------------------------------

Message: 2
Date: Tue, 26 Jul 2005 14:38:01 +0200
From: George Simpson <george.simpson.r129 at tiscali.fr>
Subject: Re: [R129 SL] WINDOW
To: SL Mailing List <r129list at mbcoupes.com>
Message-ID: <42E62EA9.8000803 at tiscali.fr>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

It's strange that the glass hits the top - why would the window go up 
beyond it's usual 'end of travel'?

Try using the hard top/soft top Raise/Lower red switch. You only need to

push the red button backwards or forwards a little way and both windows 
should start to lower. Once half way down, reverse what you are doing 
with the red button and see if that changes anything.

If that doesn't work, maybe one of our resident electronics experts can 
suggest a 'reset' solution (you have, of course, checked the fuses !!)

George Simpson
Cognac

william hughes wrote:

> this morning i put up both side windows - tried to close driver's side

> door and window is stuck in the fully up position - hits the top and
> trouble closing door.
> and the switch does nothing can't move it up or down - please help
> regards,
> bill
> The MB Coupes Website!
> R129 SL Mailing List
>


End of R129LIST Digest, Vol 9, Issue 12
***************************************



End of R129LIST Digest, Vol 9, Issue 13
***************************************