[R129 SL] Sticky window

[Rob Vonderhaar]

Jerry,
No problem.  As for removing that plastic panel, I can't really say. I didn't do it, because removing the speaker assembly and of course the plastic sheeting gave me all the access I needed.  The new motor went right in through the speaker opening, and between that and the other holes cut into the door, I was able to lube the regulator satisfactorily.  If I'd instead faced replacing the whole regulator, I might feel differently.

Good luck!
     Rob

From: r129list-bounces at mbcoupes.com [mailto:r129list-bounces at mbcoupes.com] On Behalf Of gerhard stefandl
Sent: Monday, December 15, 2008 9:59 AM
To: r129list at mbcoupes.com
Subject: [R129 SL] Sticky window

Rob,
Thank you for the excellent advice. The link to the description on removing the door panel as extraordinary, and your description of the window issue was right on the money. Do you know if it makes any sense to remove the outside plastic panel at the bottom of the door, for better access to the window drive assembly?
Thanks again for the great advice,
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/r129list/attachments/20081215/85584fd7/attachment.html>