[R129 SL] RE: Rollbar Warning Light

[Archie Morgan]

I had a lot of these type problems.  Turns out that someone had installed,
and later took back out, an aftermarket alarm system.  I had to replace the
wiring harness and that cleared everything up.
Your problem could be in the harness itself.
Archie

----- Original Message ----- 
From: "seitle" <seitle@whidbey.com>
To: <r129list@mbcoupes.com>
Sent: Wednesday, January 07, 2004 11:37 AM
Subject: [R129 SL] RE: Rollbar Warning Light


>
> I had a similar problem. I had a warning light on the instrument panel
> and a flashing light on the rollbar switch and on the top control and
> non-op on the top. I feared the worst: i.e. the control module. I
> cleared the problem by manually lowering and raising the top just once.
> For unknown reasons this reset the problem and it has not re-occurred
> since. I assume that one of the limit switches got stuck.
>
> Rolf Seitle
>
>
>
> The MB Coupes Website!
> R129 SL Mailing List
>