[LargeFormat] Tetenol Revisited

[Jim Brick]

I have and use a JOBO ATL-2400. Literally the best JOBO there is!

Jim


At 07:31 PM 2/6/2003 -0800, Les Newcomer wrote:
>I'm not sure if this has any weight to sway a person one way or another, 
>but when I ran an  Jobo ATL-3 for a car shooter here in Detroit, that's 
>the only thing we used, and you could convincingly say his business 
>depended on it. (past tense, he went digital and sold the ATL, 2 8x10, 3 
>4x5 expert tanks + 18 reels and 4 or 5 tubes + Mistrial for $1800.) We ran 
>any and all E-6 through it, ektachrome, Velvia, Provia, 64T Ektachrome, 
>and everything from 35mm to 8x10.
>
>Les
>
>On Thursday, February 6, 2003, at 06:17 PM, Jim Brick wrote:
>
>>I personally think Kodak's Professional Single Use E6 is the best. It 
>>makes 5 liters and has instructions for mixing small amounts from the kit.
>>  Sometimes I'll mix 500cc to process one JOBO 3010 run or a couple rolls 
>> of 220. Other times I mix all 5 liters in order to process a couple 
>> dozen rolls and sheets. It is all liquid and very stable.
>>
>>http://www.kodak.com/cluster/global/en/professional/support/techPubs/ti2443/
>>ti2443.jhtml
>>
>>And I use Kodak 5 liter storage jugs when I mix a full batch.
>>
>>http://www.kodak.com/cluster/global/en/professional/products/chemistry/bottles/
>>storageBottles.jhtml
>>
>>Jim
>>
>>
>>At 05:33 PM 2/6/2003 -0800, Kent Gibbs wrote:
>>>OK, so 6 step is better than 3 step.  Any comments on Kodak vs Tetenol
>>>vs Beseler?
>>>
>>>And thanks for all the input.
>>>
>>>=====
>>>Kent M. Gibbs
>>>Knuckle Dragging Ramp Ape
>>>(a.k.a. Boeing Flightline Mechanic)
>>
>>
>>_______________________________________________
>>LargeFormat mailing list
>>LargeFormat@f32.net
>>http://www.pairlist.net/mailman/listinfo/largeformat
>
>
>_______________________________________________
>LargeFormat mailing list
>LargeFormat@f32.net
>http://www.pairlist.net/mailman/listinfo/largeformat