[LargeFormat] glue for filmholder ID

[Rei Shinozuka]

i bought some used riteways and one or 2 had numbers which appeared to be
stuck with some kind of contact cemenet.

the grafmatics do have the 1-6 number wheel, but i have six and i'd like to
number them A-F as well.

-rei

> From: Les Newcomer <lnphoto@twmi.rr.com>
> 
> I used crazy glue, but haven't checked to see if the acetone will affect 
> the plastic should I remove mine.  I actually made up a number list on the 
> mac and shot it with lith film. this way the numbers are smaller.  I also 
> took a fiberglass scratch pen (for removing battery corrosion) and took 
> the shine off the film before I attached it.  I also did a postive in one 
> corner and a negavtive in the other.  that way the id will be somewhere 
> readable.
> 
> BTW unless somebody had done a number wheel ectomy on your Grafmatic, it 
> has a number id system already.
> 
> 
> les
> 
> 
> On Friday, December 27, 2002, at 01:07 PM, Rei Shinozuka wrote:
> 
> > i'd like to make some filmholder IDs for my riteways and grafmatics.
> > i figure a sharpie on chips made from cutting up fixed clear 4x5 film
> > would be about right, but what's the preferred way of gluing it into the
> > slot semi-permanently?
> >
> > thanks,
> >
> > -rei
> >
> > --
> > Rei Shinozuka shino@panix.com
> > Ridgewood, New Jersey

-- 
Rei Shinozuka shino@panix.com
Ridgewood, New Jersey