[LargeFormat] Polaroid back instruction!

[Paul and Paula Butzi]

To load film:

1. Move the lever so the end of the handle is close to the "L".
2.  hold about in the middle, insert the clip end into the holder and
    push the packet in.
3.  let go of the middle and push the packet all the way in.

To make an exposure:
0.  load a packet into the holder
1.  Hold the very end of the envelope, pull gently straight out.
2.  make the exposure.
3.  Push the envelope back in.

To process the film:
0.  Load and expose the packet.
1.  Move the lever to 'P'.
2.  Grab the end of the packet firmly and pull it out
    at a moderate speed.
3.  Wait for the appropriate amount of time (varies with film)
    and then peel the packet open and separate negative and print.

You can remove the packet without processing by leaving the lever
in the 'L" position and pushing on the 'R' button while withdrawing the packet.

Doubtless you can get real instructions from the Polaroid website.

-Paul
----- Original Message ----- 
From: "Robert Mayrand" <dnaryam@videotron.ca>
To: <LargeFormat@f32.net>
Sent: Wednesday, December 19, 2001 12:38 PM
Subject: [LargeFormat] Polaroid back instruction!


> I just bought a back, but I've never used one before. Anybody can scan me
> instruction, explain me how to use it or forward me a link who explain
> everything there is to know.
> 
> The back is the 545i
> 
> Thank you.
> 
> Robert
> Mtl, Quebec
> dnaryam@videotron.ca
> 
> 
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat
>