[LargeFormat] Part 2 Hold ON!! Graflok ground glass
Ken Hough
largeformat@f32.net
Sat Dec 15 10:58:00 2001
Clive,
I have made lots of ground glass. When I use grinding compound I place a
1/2 inch plate glass on the bench and a slurry of roughing powder and water.
Then I put the piece to be ground on top and start a figure 8 motion.
I'll work it till the appropriate grind is done. But the acid is available in
different grades. Coarse to fine. So no more hand grinding!
Ken
To: largeformat@f32.net
From: Clive Warren <cocam@cableinet.co.uk>
Subject: Re: [LargeFormat] Part 2 Hold ON!! Graflok ground glass
Send reply to: largeformat@f32.net
<mailto:largeformat-request@f32.net?subject=subscribe>
<mailto:largeformat-request@f32.net?subject=unsubscribe>
Date sent: Sat, 15 Dec 2001 14:39:45 +0000
[ Double-click this line for list subscription options ]
At 2:31 pm -0600 14/12/01, Ken Hough wrote:
>Has anyone besides me done this?
>Ken
>
>>HOLD ON !! You need the following:
>> .062 thick glass. Go to a glass shop and have them order a sheet for you.
>>If they will not try another glass shop. Or a stained glass shop.
>>Pittsburgh Plate glass makes it. A 2x3 foot section costs 22.00
>>Second, while at the stain glass shop get some acid etch for your glass.
>>3rd. Get the glass cut to size minus 25 thou on 2 sides. This insures
>>it will float a bit in the frame. Now the fun part. Put heavy clear
>>packing tape
>>on one side of the glass. Cover the whole side. Cut the excess tape off.
>>Now apply the Acid etch. DO NOT LET THIS STUFF CONTACT YOU
>>OR ANYTHING METAL. Do it in a tupperware tray. Let it etch fo the
>>proper time. READ THE INSTRUCTIONS!. Rinse and remove the tape.
>>Guess what kiddies! You have ground glass. Remember do not be afraid.
>>My Motto is JUST DO IT.
>>Ken
Looks like you're one of very few Ken!
I have used fine grinding paste (aluminium oxide) and some sheet
glass and produced reasonable results. It is easier to focus with a
ground glass rather than etched glass in my experience. However the
image quality on an etched glass is significantly higher and in most
cases preferable if focusing is not a problem.
Cheers,
Clive
_______________________________________________
LargeFormat mailing list
LargeFormat@f32.net
http://www.pairlist.net/mailman/listinfo/largeformat
******Ken Hough Photographic Repair******
Specializing in Deardorff Refinishing
Lens Recementing and Shutter repair
Contribitor to McKeowns Price Guide
Deardorff Section
Custom machined Photographic items
Text Contents Copyright 1999 KHPR
http://deardorffcameras.0catch.com/
Est. 1980