[LargeFormat] Rapax shutter CLA
Clive Warren
largeformat@f32.net
Wed Feb 28 17:28:01 2001
At 2:12 pm -0800 28/2/01, Les Newcomer wrote:
>
>snip
> > >I have taken the front off, the speed selector off (the equivialent of
>> >removing the air cleaner) and looking under the bonnet. On occassion the
>> >'splash and dash' trick--hit it with aerosol Trichlor, or contact
>> >cleaner has worked for me. It removes the old oil from the pivot points
>> >and I re-lube with some clock oil and a toothpick. I won't say it
>> >replaces a good engine rebuild, but it may delay it. However, I will
>> >reluctantly admit this does not work when oil is on the blades.
>> >
> > >Les
>snip
>In the states Radio shack sells contact cleaner to the TV and VCR repair
>crowd. The only trouble I've found is that most of them add a lubricant
>"cleans and lubricates in one step!" The problem is old salad oil is
>cheap and the cleaner (1,1,1 Tri Clor) is expensive, I think the last
>can I had was about 50/50 what a mess. This same protocol works on
>compound shutters too.
>
Les, I guess the contents have to be described on the can by law -
which makes are the "purest" trich.? Salad oil is best on salads :-)
--
All the best,
Clive Warren http://www.f32.net
Large Format travel and stock photography