argus[-clients]-3.0.8.2

Fri Jan 15 11:18:16 EST 2016

OK,  so I’ve uploaded argus-clients-3.0.8.2.rc.2 here:
   http://qosient.com/argus/dev/argus-clients-3.0.8.2.rc.2.tar.gz <http://qosient.com/argus/dev/argus-clients-3.0.8.2.rc.2.tar.gz>

Can to look to see if this fixes these issues for you ??
Thanks !!!!
Carter

> On Jan 14, 2016, at 9:32 PM, David Edelman <dedelman at iname.com> wrote:
> 
> I've hit this same problem several times. If you are not in an IPv6 environment, or if you aren't concerned about MLDV2, you can edit  the argus_util.c source file in the common directory and comment out the case statement in question.
> 
> It will look like this:
> 
> 20034                break;
> 20035             case ICMP6_MEMBERSHIP_REPORT:
> 20036                retn = icmptypestr[32];
> 20037                break;
> 20038            // case MLDV2_LISTENER_REPORT:
> 20039             //   retn = icmptypestr[32];
> 20040              //  break;
> 20041             case ND_ROUTER_SOLICIT:
> 20042                retn = icmptypestr[41];
> 20043                break;
> 
> NB: the file is write protected so you need to use a bit of gentle force to modify it.
> 
> It's ugly but effective until there is a fix.
> 
> After you edit the file, return to the main directory and 
> make clean
> make
> sudo make install;
> 
> --Dave
> 
> -----Original Message-----
> From: Argus-info [mailto:argus-info-bounces+dedelman=iname.com at lists.andrew.cmu.edu] On Behalf Of Ken Welker via Argus-info
> Sent: Thursday, January 14, 2016 4:21 PM
> To: Carter Bullard <carter at qosient.com>
> Cc: Argus <argus-info at lists.andrew.cmu.edu>
> Subject: Re: [ARGUS] argus[-clients]-3.0.8.2
> 
> argus-clients-3.0.8.2.rc.1 is the latest dev client I can find, but it
> there's an error that prevents it from compiling.
> 
> ./argus_util.c: In function ‘ArgusGetICMPv6Status’:
> ./argus_util.c:20038:18: error: ‘MLDV2_LISTENER_REPORT’ undeclared
> (first use in this function)
>             case MLDV2_LISTENER_REPORT:
>                  ^
> 
> 
> Ken Welker
> kwelker at vt.edu
> 540-231-0635
> 
> On 1/14/2016 2:02 PM, Carter Bullard wrote:
>> Hey Ken,
>> Should be in current release candidates ... argus-3.0.8.rc.1 and argus-clients-3.0.8.rc.2 ???
>> Carter
>> 
>> 
>>> On Jan 14, 2016, at 1:23 PM, Ken Welker <kwelker at vt.edu> wrote:
>>> 
>>> Hi Carter!
>>> 
>>> Will the 3.0.8.2 release have the ICMPv6 type/code filtering we
>>> discussed in the summer? I'd be happy to help with at least this
>>> documentation.
>>> 
>>> -Ken
>>> 
>>> 
>>> Ken Welker
>>> kwelker at vt.edu
>>> 540-231-0635
>>> 
>>>> On 1/14/2016 11:25 AM, Carter Bullard via Argus-info wrote:
>>>> Hey /Elof,
>>>> I have to say that I'm embarassed that I haven't been able to get the code out.  I've been so busy trying to get the new company direction going, that I haven't been able to give argus the attention.
>>>> I have not been able to go theough the support directories (man pages, Config descriptions, etc..) to make sure they reflect changes.  I don't think that is "critical" but it is stuff that needs to be done.
>>>> 
>>>> I have the release tarfiles and sig files ready to go (have been ready for months now), the code seems to be working well, but there maybe debian distribution build issues (rpms should be good) and I haven't reviewed the Windows port to see if its OK.  If you think that we can be a little sloppy, then I can release almost immediately.
>>>> 
>>>> Opinions ?!???
>>>> 
>>>> Carter
>>>> 
>>>>> On Jan 14, 2016, at 5:37 AM, elof2 at sentor.se wrote:
>>>>> 
>>>>> 
>>>>> Hi Carter!
>>>>> I hope everything is most excellent! :)
>>>>> 
>>>>> I'm just bumping this, since the official argus release is still holding at 3.0.8.1
>>>>> 
>>>>> /Elof
>>>>> 
>>>>> 
>>>>>> On Thu, 12 Nov 2015, Elof via Argus-info wrote:
>>>>>> 
>>>>>> 
>>>>>> Hi Carter!
>>>>>> 
>>>>>> Thanks!
>>>>>> Could you also update http://qosient.com/argus/ and http://qosient.com/argus/downloads.shtml to show this?
>>>>>> 
>>>>>> /Elof
>>>>>> 
>>>>>> 
>>>>>>> On Wed, 4 Nov 2015, Carter Bullard via Argus-info wrote:
>>>>>>> 
>>>>>>> Gentle people,
>>>>>>> Based on popular demand, I’ll be releasing 3.0.8.2 next week.
>>>>>>> I apologize for being so busy the last 3-4 months, and not getting to all the requests.
>>>>>>> We fixed a number of issues in the last 2-3 months, and a few popped up that may not have gotten attention, PF_RING … but I believe that all faults have been addressed and issues like IPv6-ICMP, etc...
>>>>>>> If you feel that your problem has not been addressed, please send email so we can “figure it out”, so to speak.
>>>>>>> I will upload the release candidates today for argus and clients with the latest code and will send out a notification to the list.
>>>>>>> Hope all is most excellent,
>>>>>>> Carter
>>> 
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20160115/ea75334f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6837 bytes
Desc: not available
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20160115/ea75334f/attachment.bin>