Netflow v9 ipv6

Carter Bullard carter at qosient.com
Wed Apr 1 14:37:10 EDT 2015


Hey Nichole,
Good too see you back on the list !!!  I'll put some cycles on this  ... 
I don't have access to any Netflow data, so I'll need testers  !!!!

Carter




> On Apr 1, 2015, at 2:23 PM, Nichole K. Boscia <Nichole.K.Boscia at nasa.gov> wrote:
> 
> 
> Hi Carter,
> 
> I think we tried to get this to work a couple years ago with no luck. I'm still interested in adding Netflow v9 IPv6 to our Argus capture, so I'm adding in on the bugging!
> 
> Cheers,
> -nik
> 
> -------------------------------------------
> Nichole K. Boscia
> Senior Network Engineer, CSC
> NASA Advanced Supercomputing Division
> Ames Research Center, Moffett Field, CA 94035
> 
>> On Wed, 1 Apr 2015, Carter Bullard wrote:
>> 
>> Date: Wed, 1 Apr 2015 13:59:55 -0400
>> From: Carter Bullard <carter at qosient.com>
>> To: Eric Camirand <techr at nexweb.ca>
>> Cc: Argus <argus-info at lists.andrew.cmu.edu>
>> Subject: Re: [ARGUS] Netflow v9 ipv6
>> Hey Eric,
>> I have the files, but have not had time to look into it !!!
>> Been very busy, but will be addressing argus issues, now that we've made some progress on the business, and can get some cycles.
>> 
>> Keep bugging me about this, to get it working !!!
>> Thanks !!
>> Carter
>> 
>> 
>> 
>>> On Apr 1, 2015, at 1:57 PM, Eric Camirand <techr at nexweb.ca> wrote:
>>> 
>>> Hello Carter,
>>> 
>>> I have sent you some pcap files regarding my issue back in december but i think your spam filter is dropping my emails. How should i send those to you ?
>>> 
>>> Thanks !
>>> 
>>> Eric
>>> 
>>>> On Dec 10, 2014, at 1:04 PM, Carter Bullard <carter at qosient.com> wrote:
>>>> 
>>>> Hey Eric,
>>>> The netflow v9 should work.  Seems like we’re close with yours.  I don’t have access to v9 data,
>>>> if you can capture some packets and share, I’ll try to fix it.
>>>> 
>>>> Carter
>>>> 
>>>>> On Dec 10, 2014, at 11:35 AM, Eric Camirand <techr at nexweb.ca> wrote:
>>>>> 
>>>>> Hello,
>>>>> 
>>>>> What is the status of netflow v9 ipv6 support in 3.0.8 ?
>>>>> I would like to read v9 flows from nfdump or nprobe but ipv6 flows are not
>>>>> decoded correctly.
>>>>> 
>>>>> Ex: ra -S cisco://127.0.0.1:9996 ->
>>>>> 14:46:23.869000 N ospf 0.0.0.0 -> 0.0.0.0 1 84 REQ
>>>>> 14:47:53.000000 N ipv6-* 0.0.0.0 -> 0.0.0.0 1 72 REQ
>>>>> 14:47:29.889000 N vrrp 0.0.0.0 -> 0.0.0.0 1 76 REQ
>>>>> 14:50:03.878000 N tcp 0.0.0.0.44944 ?> 0.0.0.0.bgp 1 99 INT
>>>>> 
>>>>> Thanks!
>>>>> 
>>>>> 
>>>>> Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20150401/28cf1a2c/attachment.html>


More information about the argus mailing list