Ragraph not counting bytes/bits correctly?

[Carter Bullard]

Hey Can,
Can you share the argus file that generates the bad graph ??
Only thing I've experienced with a filtered file generating unexpected results, compared to the original (other than bugs of course), is where the auto scaling makes the graph look really weird (magnifys by using a huge Y scale factor).

Carter

Carter Bullard, QoSient, LLC
150 E. 57th Street Suite 12D
New York, New York 10022
+1 212 588-9133 Phone
+1 212 588-9134 Fax

> On Jul 23, 2014, at 5:04 AM, "Desem, Can" <Can.Desem at team.telstra.com> wrote:
> 
> Hi Carter,
>  
> This may be my fault.... I am removing PPPoE from  a pcap file and then running argus using the modified file which may be causing the issue.
>  
> It seems that with the unmodified file the results are OK.
>  
> Regards,
> CDesem
>  
> From: Desem, Can 
> Sent: Wednesday, 23 July 2014 3:02 PM
> To: 'Carter Bullard'
> Cc: argus-info at lists.andrew.cmu.edu
> Subject: Ragraph not counting bytes/bits correctly?
>  
> Hi  Carter,
>  
> It seems that when plotting bytes, ragraph does not seem to get the values right. The graph seems to be about a factor of 10 lower than the actual rate. The packet counts seem ok.
>  
> I am using the latest software 3.0.8 and the simple command as follows
>  
> # ragraph bytes  -M 10s  -r data.argus –w output.png
>  
>  
> Regards,
>  
> CDesem
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20140723/4d4dd5e2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2443 bytes
Desc: not available
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20140723/4d4dd5e2/attachment.bin>