double radium
CS Lee
geek00l at gmail.com
Sat Jun 9 08:37:24 EDT 2012
hi Carter,
nothing much, anyway I'm double checking now
On Sat, Jun 9, 2012 at 8:12 PM, Carter Bullard <carter at qosient.com> wrote:
> no messages from radium about diconnecting and reconnecting ?
>
> Carter
>
> On Jun 9, 2012, at 12:08 AM, CS Lee <geek00l at gmail.com> wrote:
>
> hi Carter,
>
> bivio - 10.0.0.1
> argus - 10.0.0.1:561
>
> linux server - 10.0.0.3
> radium 1 - 127.0.0.1:561
> radium 2 - 127.0.0.1:562
> argus client - ra,rasqlinsert connects to radium 2
>
> I run double radium as you mentioned, then use rasqlinsert -D 3, after a
> while I get this
>
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.265201 ArgusClientTimeout
> ArgusTotalSearches 139553 ArgusTotalSQLUpdates 331417 written 343833002
> bytes
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.415427 ArgusRefreshDisplay
> (0x6afbe010) screen 0 display 0
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.415457 ArgusClientTimeout
> ArgusTotalSearches 139553 ArgusTotalSQLUpdates 331417 written 343833002
> bytes
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.565707 ArgusRefreshDisplay
> (0x6afbe010) screen 0 display 0
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.565737 ArgusClientTimeout
> ArgusTotalSearches 139553 ArgusTotalSQLUpdates 331417 written 343833002
> bytes
> rasqlinsert[8207.2027106b6c7f0000]: 10:25:42.673873 ArgusRefreshDisplay
> (0x6afbe010) screen 0 display 0
>
> No data is insert to db anymore, however in radium -D 3, nothing much
> information is show, radium keeps running, both radium shows similar
> message likes below
> radium[8040.00377a8d377f0000]: 10:24:53.173498 ArgusOutputProcess()
> received mar 0x97a73b0 totals 1085733 count 1 remaining 0
> radium[8040.00377a8d377f0000]: 10:25:42.019902 ArgusOutputProcess()
> received mar 0xa983200 totals 1132458 count 0 remaining 0
> radium[8040.00377a8d377f0000]: 10:25:53.233622 ArgusOutputProcess()
> received mar 0x76dcdba0 totals 1143286 count 0 remaining 0
> radium[8040.00377a8d377f0000]: 10:26:42.064478 ArgusOutputProcess()
> received mar 0x6c0ebf80 totals 1190136 count 0 remaining 0
> radium[8040.00377a8d377f0000]: 10:26:53.123011 ArgusOutputProcess()
> received mar 0xc0fe0d0 totals 1201177 count 1 remaining 0
>
> However the catch now is radium 2 is running but no longer working
> properly, I can still connect to radium 1 to retrieve data, but after a
> while radium 1 also not getting anything.
>
>
> --
> Best Regards,
>
> CS Lee<geek00L[at]gmail.com>
>
> http://geek00l.blogspot.com
> http://defcraft.net
>
>
--
Best Regards,
CS Lee<geek00L[at]gmail.com>
http://geek00l.blogspot.com
http://defcraft.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20120609/6e902531/attachment.html>
More information about the argus
mailing list