RPM build for argus it's OK but NOT OK for argus-clients

Tue Nov 3 21:27:07 EST 2009

Hey Guilsson,
Grab the newest argus-clients software, and give it a try.
Should work whether the ramysql programs are made or not,
and you shouldn't have to be root to get it done.

Carter

On Nov 3, 2009, at 7:20 PM, Guilsson Guilsson wrote:

> Unfortunately, they are the same:
>
> root at gwmoney:~/argusstuff/original # wget ftp://ftp.qosient.com/dev/argus-3.0/argus-clients-3.0.2.tar.gz
> --2009-11-03 21:53:59--  ftp://ftp.qosient.com/dev/argus-3.0/argus-clients-3.0.2.tar.gz
>            => `argus-clients-3.0.2.tar.gz.1'
> Resolving ftp.qosient.com... 216.92.197.167
> Connecting to ftp.qosient.com|216.92.197.167|:21... connected.
> Logging in as anonymous ... Logged in!
> ==> SYST ... done.    ==> PWD ... done.
> ==> TYPE I ... done.  ==> CWD /dev/argus-3.0 ... done.
> ==> SIZE argus-clients-3.0.2.tar.gz ... 1803847
> ==> PASV ... done.    ==> RETR argus-clients-3.0.2.tar.gz ... done.
> Length: 1803847 (1.7M)
>
> 100%[=========================================================>]  
> 1,803,847   69.4K/s   in 26s
>
> 2009-11-03 21:54:27 (68.7 KB/s) - `argus-clients-3.0.2.tar.gz.1'  
> saved [1803847]
>
> root at gwmoney:~/argusstuff/original # md5sum *
> 0346f096095e201055b18ef2bb968eed  argus-clients-3.0.2.tar.gz
> 0346f096095e201055b18ef2bb968eed  argus-clients-3.0.2.tar.gz.1
>
> As you can see in my first post, I use WGET to get tar.gz directly  
> from the site.
>
> The argus-clients.spec supplied by Chris (tks Chris) is strongly  
> different from yours.
>
> Thanks
> -Guilsson
>
>
> On Tue, Nov 3, 2009 at 18:25, Carter Bullard <carter at qosient.com>  
> wrote:
> Hey Guilsson,
> Looks like you have an old argus-clients-3.0.2.
> Here is the specfile in the current argus-clients-3.0.2.tar.gz that  
> is on the server.
> Compare to see if its different than yours, and you should grab the  
> new one.
> (we host not released, so the notion that the file can change  
> without a name change
> is appropriate).
>
> Carter
>
>
>
>
> On Nov 2, 2009, at 3:02 PM, Guilsson Guilsson wrote:
>
>> Hey Carter,
>> Let's go:
>>
>> cd /root/argusstuff/original
>> rm -rf /root/rpmbuild/*
>> rpmbuild -ta argus-clients-3.0.2.tar.gz
>> cp -p /root/rpmbuild/BUILD/argus-clients-3.0.2/Makefile /root/ 
>> argusstuff/Makefile.original.txt
>>
>> ===RPMBUILD ORIGINAL OUTPUT: http://pastebin.com/f4aaf6398
>>
>> cd /root/argusstuff/patched
>> rm -rf /root/rpmbuild/*
>> rpmbuild -ta argus-clients-3.0.2.tar.gz
>> cp -p /root/rpmbuild/BUILD/argus-clients-3.0.2/Makefile /root/ 
>> argusstuff/Makefile.patched.txt
>>
>> ===RPMBUILD PATCHED OUTPUT: http://pastebin.com/f2d707dae
>>
>> MAKEFILE ARE IDENTICAL:
>> diff /root/argusstuff/Makefile.original.txt /root/argusstuff/ 
>> Makefile.patched.txt ; echo $?
>> 0
>>
>> ===MAKEFILE CLIENTS OUTPUT: http://pastebin.com/d5b9e796f
>>
>>
>> But I noticed the contents of /root/rpmbuild/* tree have  
>> significant differences.
>> While /root/rpmbuild/BUILDROOT is EMPTY for original package, the  
>> same directory for patched package has a lot of files (the  
>> executables and docs: argus-clients-3.0-2.i386 tree).
>>
>> /root/rpmbuild contents for ORIGINAL: http://pastebin.com/f581de74d
>> /root/rpmbuild contents for PATCHED: http://pastebin.com/f53e9143d
>>
>> Just for comparison, the RPMBUILD for the server run smoothly:
>>
>> #  rm -rf /root/rpmbuild/* ; cd /root/argusstuff/server ; rpmbuild - 
>> ta argus-3.0.2.tar.gz
>>  # rpm -qlp /root/rpmbuild/RPMS/i386/argus-3.0-2.i386.rpm
>> /etc/argus.conf
>> /etc/rc.d/init.d/argus
>> /usr/local/bin/argusarchive
>> /usr/local/bin/argusbug
>> /usr/local/sbin/argus
>> /usr/local/share/doc/argus-3.0
>> /usr/local/share/man/man5/argus.conf.5
>> /usr/local/share/man/man8/argus.8
>> ===SERVER OUTPUT: http://pastebin.com/f1c08bc95
>>
>> Thanks
>> -Guilsson
>> On Mon, Nov 2, 2009 at 13:37, Carter Bullard <carter at qosient.com>  
>> wrote:
>> Hey Guilsson,
>> Can you send the entire output of rpmbuild, and the contents of the  
>> resulting
>> ./Makefile?  Seems like you're ./configure script isn't doing the  
>> right thing.
>>
>> Carter
>>
>>
>> On Nov 1, 2009, at 5:10 PM, Guilsson Guilsson wrote:
>>
>>> I need to install argus on some Fedora 11 machines without C  
>>> compiler and must be in RPM format.
>>>
>>> I run these commands in a Fedora 11 with development tools  
>>> installed.
>>>
>>> For ARGUS SERVER worked fine:
>>>
>>> # mkdir -p /root/argusstuff
>>> # cd  /root/argusstuff
>>> # wget ftp://ftp.qosient.com/dev/argus-3.0/argus-3.0.2.tar.gz
>>> # rm -rf /root/rpmbuild/*
>>> # rpmbuild -ta argus-3.0.2.tar.gz
>>> ... snip ...
>>> # rpm -qlp /root/rpmbuild/RPMS/i386/argus-3.0-2.i386.rpm
>>> /etc/argus.conf
>>> /etc/rc.d/init.d/argus
>>> /usr/local/bin/argusarchive
>>> /usr/local/bin/argusbug
>>> /usr/local/sbin/argus
>>> /usr/local/share/doc/argus-3.0
>>> /usr/local/share/man/man5/argus.conf.5
>>> /usr/local/share/man/man8/argus.8
>>> For ARGUS CLIENTS didn't  worked:
>>>
>>> # mkdir -p /root/argusstuff
>>> # cd  /root/argusstuff
>>> # wget ftp://ftp.qosient.com/dev/argus-3.0/argus- 
>>> clients-3.0.2.tar.gz
>>> # rm -rf /root/rpmbuild/*
>>> # rpmbuild -ta argus-clients-3.0.2.tar.gz
>>> ... snip ...
>>> ----------------------------------------------------------------------------------------------------------------------------------------
>>> make[1]: Leaving directory `/root/rpmbuild/BUILD/argus- 
>>> clients-3.0.2/radump'
>>> + mkdir -p /usr/local
>>> + mkdir -p /usr/local/bin
>>> + mkdir -p /usr/share/doc/argus-clients-3.0
>>> + mkdir -p /usr/local/argus
>>> + mkdir -p /usr/local/argus/lib
>>> + cp -Rp support /usr/share/doc/argus-clients-3.0
>>> + cp -Rp doc/CHANGES doc/FAQ doc/HOW-TO doc/README doc/html /usr/ 
>>> share/doc/argus-clients-3.0
>>> + install -m 0555 -o root -g root bin/ra /usr/local/bin
>>> + install -m 0555 -o root -g root bin/rabins /usr/local/bin
>>> + install -m 0555 -o root -g root bin/racluster /usr/local/bin
>>> + install -m 0555 -o root -g root bin/racount /usr/local/bin
>>> + install -m 0555 -o root -g root bin/radium /usr/local/bin
>>> install: cannot stat `bin/radium': No such file or directory
>>> error: Bad exit status from /var/tmp/rpm-tmp.Dg2Wb5 (%build)
>>>
>>> RPM build errors:
>>>     Bad exit status from /var/tmp/rpm-tmp.Dg2Wb5 (%build)
>>> ----------------------------------------------------------------------------------------------------------------------------------------
>>>
>>> Any ideas on how to fix ?
>>>
>>> -Guilsson
>>>
>>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20091103/340c8817/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3815 bytes
Desc: not available
URL: <https://pairlist1.pair.net/pipermail/argus/attachments/20091103/340c8817/attachment.bin>