debugging argus on tun interface

[poncenby smythe]

On 23 Feb 2006, at 19:04, eric wrote:

> On Thu, 2006-02-23 at 19:01:47 +0000, poncenby smythe proclaimed...
>
>> i'm trying to get argus to collect flow data on a tun interface,
>> which is actually a USB adsl modem (speedtouch) plugged into a box
>> running openbsd 3.8 generic.
>>
>> when i execute the argus daemon it simply exits. how do I compile
>> argus with debugging enabled?
>
> cd <argus source dir>
> touch .debug .devel
> ./configure
> make

thanks very much for that.

>
>> and which version of argus of argus shall i use? 2.0.6 from the
>> website or a development version from the ftp site?
>
> There's problems building 2.0.6.fixes.1 due to the Makefile not  
> finding some
> of the man pages, etc. Just touch(1) each one as you go. Then build  
> clients
> and install them.
> --

I downloaded the 2.0.6.fixes.1 archive and successfully built the  
argus daemon.
then executed this command:
./argus -D 10 -i tun0
and this is output:
argus[23533]: 23 Feb 06 21:10:20 clearArgusDevice(Lr???) returning
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 24) returning  
0x7d8d4020
argus[23533]: 23 Feb 06 21:10:20 ArgusNewList () returning 0x7d8d4020
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 12) returning  
0x81fd2040
argus[23533]: 23 Feb 06 21:10:20 ArgusPushFrontList (0x7d8d4020,  
0x81fd2030) returning 0xcfbc73cd
argus[23533]: 23 Feb 06 21:10:20 setArgusDevice(tun0) returning
argus[23533]: 23 Feb 06 21:10:20 setArgusPortNum(0) returning
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 4) returning 0x81fd2050
argus[23533]: 23 Feb 06 21:10:20 ArgusNewModeler() returning 0x81fd2050
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 108) returning  
0x8bbc6000
argus[23533]: 23 Feb 06 21:10:20 ArgusNewOutput() returning retn  
0x8bbc6000
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 4) returning 0x81fd2060
argus[23533]: 23 Feb 06 21:10:20 ArgusNewSource() returning 0x81fd2060
argus[23533]: 23 Feb 06 21:10:20 ArgusFrontList (0x7d8d4020)  
returning 0x81fd2030
argus[23533]: 23 Feb 06 21:10:20 ArgusFree (0x81fd2040) returning
argus[23533]: 23 Feb 06 21:10:20 ArgusPopFrontList (0x7d8d4020)  
returning
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 12) returning  
0x81fd2040
argus[23533]: 23 Feb 06 21:10:20 ArgusPushFrontList (0x7d8d4020,  
0x81fd2030) returning 0x7d8d4020
argus[23533]: 23 Feb 06 21:10:20 ArgusPushBackList (0x7d8d4020,  
0x81fd2030) returning 0x7d8d4020
argus[23533]: 23 Feb 06 21:10:20 Arguslookup_pcap_callback(12)  
returning (null): 0x0
argus[23533]: 23 Feb 06 21:10:20 ArgusInitSource() returning
argus[23533]: 23 Feb 06 21:10:20 ArgusOutputProcess[19475] created
argus[19475]: 23 Feb 06 21:10:20 ArgusCalloc (1, 65596) returning  
0x82918000
argus[19475]: 23 Feb 06 21:10:20 ArgusCalloc (1, 24) returning  
0x7d8d40c0
argus[23533]: 23 Feb 06 21:10:20 ArgusInitOutput() returning
argus[19475]: 23 Feb 06 21:10:20 ArgusNewList () returning 0x7d8d40c0
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (65536, 4) returning  
0x8a1bf000
argus[19475]: 23 Feb 06 21:10:20 ArgusNewSocket (3) returning 0x82918000
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 65596) returning  
0x88fb9000
argus[19475]: 23 Feb 06 21:10:20 ArgusInitOutputProcess() returning
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 24) returning  
0x7d8d40c0
argus[23533]: 23 Feb 06 21:10:20 ArgusNewList () returning 0x7d8d40c0
argus[23533]: 23 Feb 06 21:10:20 ArgusNewSocket (4) returning 0x88fb9000
argus[23533]: 23 Feb 06 21:10:20 ArgusCalloc (1, 12) returning  
0x81fd2080
argus[23533]: 23 Feb 06 21:10:20 ArgusNewQueue () returning 0x81fd2080
argus[23533]: 23 Feb 06 21:10:20 ArgusInitModeler(): ArgusHashArray  
0x8a1bf000
argus[23533]: 23 Feb 06 21:10:20 ArgusGetPackets () returning
argus[23533]: 23 Feb 06 21:10:20 ArgusLoop() returning
argus[23533]: 23 Feb 06 21:10:20 main() shuting down


this is where I'm not really sure what to do next. any thoughts?

poncenby